Silent-Mode Acoustic Enclosure for 2 Panasonic VRF systems during construction for a supermarket.
The sound hood enables a sound reduction of around 22 dB (A) and protects the adjacent residential buildings from noise emissions from the systems.
Enclosure Size: 3'200 x 1'280 x 2'550 mm (L x D x H)
Acoustic enclosure for a Mitsubishi City VRF system installed on a terrace in the immediate vicinity of apartments.
Sound reduction around 25 dB (A).
Enclosure Size: 1'280 x 1'280 x 2'550 mm (L x D x H)
Acoustic enclosure for a group of 3 Dakin VRV systems mounted on a roof of a data center.
The enclosure was pre-assembled by us in Italy and delivered to Germany with a dedicated transport.
The enclosure has the following dimensions: 4,300 x 2,200 x 2,850 mm (L x W x H).
Using a crane lift, the acoustic hood was simply slipped over the system like a hat and the air flow was then adjusted.
The enclosure reduces the noise from the VRV to the opposite residential area.
Sound reduction on all sides 19 dB (A) measured according to the envelope surface method (spectrum 65 to 8,000 Hz).
The hood is again made entirely of aluminum.
Standard enclosures for Aircon, Mini VRF/VRV and Heat Pump Units.
Typical noise reduction between 18 - 25 dB(A).
Small Foot Print
Free Choose of RAL Color
For Air Volumes starting by 2'500 m3/h until 7'500 m3/h
Acoustic enclosures for "Bitzer compressors" are primarily aimed at eliminating low-frequency noises and also to dissipate the warm air.
The planning of our acoustic enclosures is based on the following considerations:
Enclosure Base Frame
The senclosure in the picture below has the following dimensions:1'700 x 1'000 x 1'500 mm (L x W x H).