Blank Title
  • Home
  • Products
  • About us
  • Blog
  • Contact
  • Deutsch

News BLOG

Silent-MOde Acoustic enclosures for 2 Panasconic VRF UNits

3/11/2020

0 Comments

 
Silent-Mode Acoustic Enclosure for 2 Panasonic VRF systems during construction for a supermarket.

The sound hood enables a sound reduction of around 22 dB (A) and protects the adjacent residential buildings from noise emissions from the systems.


Enclosure Size: 3'200 x 1'280 x 2'550 mm (L x D x H)


  • Completely made of aluminum.
  • Internal sound insulation 50 mm thick.
  • Service doors around the system.
  • Sound baffles for the air inlet with a depth of 350 mm
  • Sound baffles for the air outlet with a depth of 700 mm
  • Set-up time on the construction site around 2,5 hours.

For more information: info@silent-mode.com


Picture
0 Comments

Acoustic Enclosure for Mitsubishi City VRF UNit

3/11/2020

0 Comments

 
Acoustic enclosure for a Mitsubishi City VRF system installed on a terrace in the immediate vicinity of apartments.

Sound reduction around 25 dB (A).
Enclosure Size:
1'280 x 1'280 x 2'550 mm (L x D x H)


  • Completely made of aluminum.
  • Internal sound insulation 50 mm thick.
  • Service doors around the system.
  • Sound baffles for the air inlet with a depth of 350 mm
  • Sound baffles for the air outlet with a depth of 700 mm
  • Set-up time on the construction site around 1,5 hours.

For more information: info@silent-mode.com

Picture
0 Comments

Noise enclosure for 3 Daikin VRV Systems

2/11/2020

0 Comments

 
Acoustic enclosure for a group of 3 Dakin VRV systems mounted on a roof of a data center.

The enclosure was pre-assembled by us in Italy and delivered to Germany with a dedicated transport.

The enclosure has the following dimensions: 4,300 x 2,200 x 2,850 mm (L x W x H).

Using a crane lift, the acoustic hood was simply slipped over the system like a hat and the air flow was then adjusted.

The enclosure reduces the noise from the VRV to the opposite residential area.

Sound reduction on all sides 19 dB (A) measured according to the envelope surface method (spectrum 65 to 8,000 Hz).

The hood is again made entirely of aluminum.

Picture
0 Comments

Acoustic enclosure for Small Aircon + Heat Pump units

1/11/2020

0 Comments

 
Standard enclosures for Aircon, Mini VRF/VRV and Heat Pump Units.
Typical noise reduction between 18 - 25 dB(A).
Small Foot Print
Free Choose of RAL Color
For Air Volumes starting by 2'500 m3/h until 7'500 m3/h

Picture
0 Comments

Noise reduction Bitzer Compressor

1/11/2020

0 Comments

 
Acoustic enclosures for "Bitzer compressors" are primarily aimed at eliminating low-frequency noises and also to dissipate the warm air.
The planning of our acoustic enclosures is based on the following considerations:


  • Smallest possible footprint.
  • Modular expandability (modular construction with consideration of reusability for example after a rental).
  • Highest possible sound insulation.
  • Avoidance of system performance losses caused by air pressure lost.
  • Free access for service and maintenance

Enclosure Base Frame
  • Service doors with internal 50 mm sound insulation are integrated around the systems.
  • These service doors are equipped with quick-release fasteners that can be easily removed by one person.
  • With this we secure oneunhindered access for service and maintenance work.
  • The insulation material offers a high level of sound insulation over the entire frequency spectrum.
  • The insulation is also water and UV resistant and does not build up bacteria and fungi.
  • The insulation also corresponds to the highest fire safety class.
  • Environmentally friendly material (all components of the acoustic hood are recyclable).
  • Overall Sound pressure reduction of 20 dB(A)

The senclosure in the picture below has the following dimensions:1'700 x 1'000 x 1'500 mm (L x W x H).
Picture
0 Comments

    Author

    Our unique Environmental Enclosure systems provide a complete package solution for larger HVAC equipment, where noise and visual constraints are an issue on your project.

    Archives

    December 2020
    November 2020
    October 2020

    Categories

    All

    RSS Feed

Navigate Silent-Mode

Home
 
Products + Services

About us 

Impressum 

​Contact 
​
​Privacy 

Contact us 

Italy 


Silent Mode 
di Romolo Vicari
Via Trento 22 
IT-23875 Osnago 

Warehouse: 
Via Milano, 41, 23899 Robbiate LC, 

info@silent-mode.com 
Tel. +39 349 431 73 42 

Switzerland

Systemregeltechnik GmbH 
Steinhofweg 4 
CH-8112 Otelfingen 

suisse@silent-mode.com 
Tel. +41 79 872 06 66 

​UK


Clever Engineering (Kent) Ltd Unit B2, 
St. George's Business Park, Castle Rd, Sittingbourne ME10 3TB
.

technical.sales@cleverengineering.co.uk 
 
Linkedin: 
https://www.linkedin.com/company/c2sales/

German Website 

www.silent-mode.com 


​
Website Content

Environment Acoustic Enclosures for new systems and retrofitting of existing heat pumps, air conditioning, refrigeration systems, compressors, battery charging stations etc.

©Copyright 2017/2018/2019/2020
All contents, especially texts, images are protected by copyright. All rights, including reproduction, publication, editing and translation, are reserved.

Owner
Silent-Mode di Romolo Vicari , Via Trento 22, 23875 Osnago
info@silent-mode.com

  • Home
  • Products
  • About us
  • Blog
  • Contact
  • Deutsch